Prepare pipe passages

Required DURABASE WS products

Self-adhesive wall waterproofing kit for dry wall and floor waterproofing.

1 Waterproofing membrane 1 m x 30 m; 2 Spray primer; 3 Corner tape 120 mm x 50 m; 4 Base sealing tape 50 m;
5 Mounting aid: squeegee; 6 2x wall sleeves 1/2″; 7 drip protection sleeve; 8 Mounting instructions.

Prepare waterproofing for pipe passages and apply waterproofing membranes

1. stick a strip of corner tape with trowel protection strip over the sealing collars. It ensures the secure connection of the remaining sealing strip (D7) at the bottom.

2. the passes for the
Cut out the construction plug.

Screw in the construction plugs.

Starting from the center of the corner tape, mark the sealing strip above the pipe passages 20 mm upwards and cut off the sealing strip.

Apply the rest of the sealing strip at 20 mm below the center of the corner tape and stick it down to the floor.

6. cut off the sealing strip in the groove of the corner tape. Dichbahnfest roll up.

Apply a saturated spray primer to the area of the trowel protection and the fleece of the waterproofing membrane.

8. the next sealing track is docked.

DO NOT MISS ANY NEWS

By clicking you accept the Terms of Use and Privacy Policy.
0 +
EXCITING PRODUCTS
0 +
SORTIONS

#Frag Thierry

Wir helfen Ihnen bei allen Fragen rund um unsere Produkte und antworten Ihnen während unserer Geschäftszeiten umgehend.

#ASK Thierry

We will help you with any questions you may have about our products and respond promptly during our business hours.
Consent Management Platform by Real Cookie Banner